Mayberry Studio Products - Rod Kit

http://www.mayberrystudioproducts.com/rodkit.html

Rod Kit

A lot of you guys have asked about some 15mm and 19mm rods as an accessory to the Multi Facet to give you some extra options for mounting your monitors, follow focus units etc. These may also be useful for mounting motors or anything else using the 15mm or 19mm size that is common to most all cameras.

These kits include one 2in, one 3in, one 4in, and a 15mm or 19mm rod. These rods are made from T6061 Aluminum and precision ground to exact tolerances to insure proper fit. They are also threaded on each end with 3/8-16 holes so they can be attached together or bolted on to other items or rigs. There is also a 1/4 inch hole in the center of the rod for loosening and tightening the rods to each other or into the Multi -Facet or whatever you can dream up.

The Multi-Facet 1.5" & 2.0"

The Multi-Facet is an item thats usefulness is only limited by your imagination. We originally intended it to attach to the top of camera to provide many different mounting spots for any accessories you may have, on board monitors, eyelights, focusing devices or as spot for the grips to use to lock down the camera for locked off shots.

It can also be used for lighting and rigging. Its versatility makes it a must-have for any grip, set lighting or camera assistant's workbox or kit. The Multi-Facet comes in two different sizes. The 1.5 is intended for more of the on camera use, while the larger 2.0 is more for lighting, car mounting or rigging.

The Multi Facet kit comes with the following:
1 2"x5/8" Hard anodized spud with 3/8" threaded ends and
slot for 9/16" wrench
2 1"x3/8 stainless steel threaded, allen head screw
1 1"x1/4"-20 stainless steel threaded allen head screw
1 3/8 to 1/4-20 bushing
1 3/16 allen wrench